Resources

All Weather J51 AW

Chemicals | Epoxies | Anchoring/Gel

Dayton

All Weather J51 AW is a two component, moisture tolerant, styrene free, all weather epoxy acrylate hybrid anchoring gel that meets ASTM C881 and AASHTO M235 specification requirements. All Weather J51 AW is formulated to set up at room temperatures and down to temperatures of -15°F (-9˚C).



V.O.C. Content: 0 g/L
Hazardous material shipping restrictions apply. You may be contacted by Customer Service if an alternate shipping method is required.

PROP65 WARNING: This product can expose you to chemicals known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.  (Arsenic, Ethyl Acrylate, Myrcene, Silica, Titanium Dioxide, Toluene)

  • All weather and temperature installation
  • Ideal for cold weather installations
  • Moisture tolerant
  • High structural strength adhesive
  • Rapid cure & gel time at room temperatures
  • Styrene Free
  • ASTM C881/AASHTO M235 Type II* Grade 3 Class A & B. (*With exception of linear shrinkage & gel time)
  • Non-sag gel consistency for horizontal and vertical installations
  • Easy dispensing from dual cartridges
  • High bond and adhesion
All Weather J51 AW is ideal for anchoring dowels, bolts, threaded rod, pins and reinforcement steel in concrete. All Weather J51 AW can also be used in cooler and freezer applications or anywhere low temperature installations are required.
Product Code Packaging
100913 275 ml unicartridge (12/case)
100914 825 ml cartridge (8/case)
Specific customer pricing may be available in Dayton Access. Minimum standard packaging sizes may apply.

Sure Anchor™ I J51

Chemicals | Epoxies | Anchoring/Gel

Sure Anchor™ J50

Chemicals | Epoxies | Anchoring/Gel

Sure Bond™ J58

Chemicals | Epoxies | Bonder-Medium Viscosity