D9A Super Taper Tie

Forming | Sym-Ply | Ties

Dayton

D9A Super Taper Ties are used to connect STS Max-A-Form panels when specifications require or permit complete removal of the form ties from the concrete.

Product Code Description {{vm.msrpHeading}} {{vm.userPriceHeading}} Sold In Quantity
146528 15MM X 49" W/ 3/4" TO 11/16" X 24" TAPER - D/R THREAD SOLD IN 1 EACH Call for price $85.78
/ EACH
Call for price {{ vm.getMsrpPrice('146528') | currency }} / EACH Log In Call for price {{ vm.getUserPrice('146528') | currency:"$":3 }} 1 each increments
146529 15MM X 57" W/ 3/4" TO 11/16" X 32" TAPER - D/R THREAD SOLD IN 1 EACH Call for price $99.70
/ EACH
Call for price {{ vm.getMsrpPrice('146529') | currency }} / EACH Log In Call for price {{ vm.getUserPrice('146529') | currency:"$":3 }} 1 each increments
146530 15MM X 65" W/ 3/4" TO 11/16" X 40" TAPER - D/R THREAD SOLD IN 1 EACH Call for price $145.14
/ EACH
Call for price {{ vm.getMsrpPrice('146530') | currency }} / EACH Log In Call for price {{ vm.getUserPrice('146530') | currency:"$":3 }} 1 each increments
145249 32MM X 54" W/ 1/2" TO 1-1/4" X 35" TAPER - D/R THREAD Call for price $246.12
/ EACH
Call for price {{ vm.getMsrpPrice('145249') | currency }} / EACH Log In Call for price {{ vm.getUserPrice('145249') | currency:"$":3 }} 1 each increments
145250 32MM X 64" W/ 1/2" TO 1-1/4" X 45" TAPER - D/R THREAD Call for price $274.09
/ EACH
Call for price {{ vm.getMsrpPrice('145250') | currency }} / EACH Log In Call for price {{ vm.getUserPrice('145250') | currency:"$":3 }} 1 each increments
145252 32MM X 84" W/ 1/2" TO 1-1/4" X 65" TAPER - D/R THREAD Call for price $344.00
/ EACH
Call for price {{ vm.getMsrpPrice('145252') | currency }} / EACH Log In Call for price {{ vm.getUserPrice('145252') | currency:"$":3 }} 1 each increments
  • 100% reusable tie
  • Supplied with 2-1/2" threads per inch D/R thread for rapid installation and stripping
  • Features the same 32mm diameter threads on both sides
  • Manufactured with one square end for wrench turning purposes
  • Ultimate load is 128,000 lbs.
  • Uses one piece swivel wing nut accessory that can handle up to 10° battered walls without use of special washers.

D9A Super Taper Ties are used where specifications require or permit complete removal of the form ties from the concrete.

A58 - Sure Plug

Accessories | Wall Forming Accessories

B12A - D/R Thread Bar

Accessories | Wall Forming Accessories