C64 - Pres-Steel Hanger

The C64 45° Pres-Steel Hanger consists of a 90° end section and a 45° end section welded to a single wire strut. The Type 4-A is fabricated with a 1/2" 45° end section and a 1/2" 90° end section. Type 4-AN is similar with the exception of the 90° end section is a 3/4" unit. Type 5-AN is similar to the 4-A but has a 3/4" 90° end section and a 3/4" 45° end section. The C64 hangers work well on bridge rehab projects, bridge widening jobs and other similar construction where only exterior formwork support is required. Two appropriate sized B13 Hex Nuts are included with each hanger. The actual safe working load of the C64 hangers is highly dependent on the strength of the weld stud, as well as the strength of the weld itself. The safe working load is based on the use of a properly welded 3/4" diameter stud with a minimum tensile strength of 80,000 psi.

The C64 Pres-Steel Hanger is a made to order product only. Please call for lead timing, pricing, and availability.