P92H and P92HP - Fleet-Lift™ Two-Hole Erection Anchor and Fleet-Lift™ Two-Hole Erection Anchor w/ Shear Plate

Accessories

Dayton
Fleet-Lift Two-Hole Erection Anchors combine the strength, spall resistance and high-tension performance of the P92 Erection Anchor.
  • The P92H and P92HP Erection Anchors are available in 2, 4, 6 or 8-ton capacities.
  • Both available in either plain or hot-dipped galvanized finish.
  • A properly installed P98T Tension Bar is always required when using these erection anchors.
  • Shear loading for P92HP anchor is resisted by the anchor's integral shear plate
  • Two steel protrusions or “ears” on the head of the anchors provide protection against concrete spalling
Fleet -Lift P92HP Anchors are designed for horizontal to vertical edge lifts and handling of precast concrete
elements.
The P92H Two-Hole Erection Anchor was designed for use where the lift direction applies a tension load ONLY to the anchor unless used with the shear bar.
Product Code Packaging
FL403 P92H 2 TON 4.38" PLAIN
FL075 P92H 4 TON 7.50" PLAIN
FL975 P92H 4 TON 11.88" PLAIN
FL185L P92H 8 TON 13.25" PLAIN
FL403G P92H 2 TON 4.38" HOT DIPPED GALV.
FL075G P92H 4 TON 7.50" HOT DIPPED GALV.
100185 P92H 8 TON 7.00" HOT DIPPED GALV.
FL423 WITH SHEAR PLATE P92HP 2 TON 4.38" PLAIN
FL403L WITH SHEAR PLATE P92HP 2 TON 8.38" PLAIN
FL275 WITH SHEAR PLATE P92HP 4 TON 7.50" PLAIN
FL175L WITH SHEAR PLATE P92HP 4 TON 10.88" PLAIN
FL285L WITH SHEAR PLATE P92HP 8 TON 13.25" PLAIN
FL423G WITH SHEAR PLATE P92HP 2 TON 4.38" HOT DIPPED GALV.
FL403LG WITH SHEAR PLATE P92HP 2 TON 8.38" HOT DIPPED GALV.
FL275G WITH SHEAR PLATE P92HP 4 TON 7.50" HOT DIPPED GALV.
FL175LG WITH SHEAR PLATE P92HP 4 TON 10.88" HOT DIPPED GALV.
FL285LG WITH SHEAR PLATE P92HP 8 TON 13.25" HOT DIPPED GALV.
143806 W/ SHEAR PLATE - MADE IN USA P92HPUSA 2 TON 4.38" PLAIN MADE IN USA
144989 W/ SHEAR PLATE - MADE IN USA P92HPUSA 2 TON 8.38" PLAIN MADE IN USA
143904 W/ SHEAR PLATE - MADE IN USA P92HPUSA 4 TON 7.50" PLAIN MADE IN USA
144907 W/ SHEAR PLATE - MADE IN USA P92HPUSA 4 TON 10.88" PLAIN MADE IN USA
144905 W/ SHEAR PLATE - MADE IN USA P92HPUSA 8 TON 13.25" PLAIN MADE IN USA
143807 W/ SHEAR PLATE - MADE IN USA P92HPUSA 2 TON 4.38" HOT DIPPED GALV. MADE IN USA
144990 W/ SHEAR PLATE - MADE IN USA P92HPUSA 2 TON 8.38" HOT DIPPED GALV. MADE IN USA
144906 W/ SHEAR PLATE - MADE IN USA P92HPUSA 8 TON 13.25" HOT DIPPED GALV. MADE IN USA
Specific customer pricing may be available in Dayton Access. Minimum standard packaging sizes may apply.